Description
Basler Electric A1009-001 Power Supply 120V 24VAC 10VA 60Hz Control Transformer
The Basler Electric A1009-001 is a small single-phase step-down control transformer that converts 120V AC line power to a 24VAC output at 10VA. Output is brought out to three screw terminals on the underside of the enclosure, labeled AC, GRD, and AC, with pre-installed wire leads. Input is via an attached brown power cord terminating in a NEMA 5-15P plug fitted with an inline NEMA 5-15R pass-through receptacle. Made in the USA by Basler Electric of Highland, Illinois, and UL Listed.
Specifications & What's Included
- Model: A1009-001
- PCB/Chassis Number: BE115610BBA0024
- Primary (Input): 120V AC, 60Hz, 0.14A
- Secondary (Output): 24VAC, 10VA
- Phase: Single phase
- Output terminals: 3-screw block — AC, GRD, AC — with pre-installed wire leads
- Input connection: attached cord with NEMA 5-15P plug and inline NEMA 5-15R receptacle
- Enclosure: beige/tan molded plastic box
- Certifications: UL Listed
- Country of manufacture: United States (Highland, Illinois)
- Includes: unit with attached power cord and pre-wired output leads
Applications
Small step-down control transformers like the A1009-001 are standard components in industrial control panels, relay logic systems, and machine control circuits where low-voltage 24VAC power is needed to drive control relays, solenoid valves, pilot lights, and similar devices from a standard 120V branch circuit. Basler Electric specializes in power management and control components for utility, generator, and industrial applications. The 10VA rating suits single-device or light multi-device 24VAC control circuits. The inline pass-through receptacle on the input cord allows the transformer to be inserted in-line on an existing outlet circuit without an additional outlet, a common convenience feature on small panel-mount transformers. These compact units are commonly found in HVAC controls, machine tool panels, and other light industrial equipment requiring a regulated 24VAC supply.
This Basler Electric A1009-001 24VAC control transformer was pulled from a working industrial environment where it was previously in service. It has been visually inspected and photographed. The beige enclosure shows light surface wear consistent with age and use, and the brown power cord and plug adapter appear intact with no visible damage. Output wire leads are pre-installed on the screw terminals. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Basler Electric |
Model: |
A1009-001 |
MPN: |
A1009-001 |
Secondary Model: |
BE115610BBA0024 |
Type: |
AC Control Transformer / Power Supply |
SKU: |
31915 |
Primary Voltage: |
120V AC |
Secondary Voltage: |
24VAC |
Power Rating: |
10VA |
Input Frequency: |
60Hz |
Input Current: |
0.14A |
Phase: |
Single Phase |
Output Terminals: |
3-terminal screw block (AC, GRD, AC) |
Input Connection: |
NEMA 5-15P plug with inline NEMA 5-15R receptacle |
Certifications: |
UL Listed |
Country/Region of Manufacture: |
United States |
Form Factor: |
Enclosed / DIN-mountable box |
Power Requirements: |
120V AC, 60Hz, 0.14A |
Seller Notes: |
Includes attached power cord with NEMA 5-15P plug and inline receptacle. Output wire leads pre-installed on screw terminals. |
Condition Notes: |
This Basler Electric A1009-001 24VAC control transformer was pulled from a working environment. Visually inspected; enclosure shows light wear, cord and plug intact. Output leads pre-installed on screw terminals. Contact us with questions. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |