Description
Banner 753S Q45 Fiber End Assembly Omni-Beam Valu-Beam Maxi-Beam Multi-Beam
The Banner 753S is a fiber optic end assembly designed for use with Banner Engineering's Q45 Series and a wide range of compatible photoelectric sensor families. It consists of a bifurcated stainless steel armored fiber optic cable with a shared sensing tip, allowing it to interface directly with the fiber optic port on the front of a compatible Banner sensor housing. The part number visible on the original packaging is G22SA25A.
Specifications & What's Included
- Manufacturer: Banner Engineering Corp., Minneapolis, MN 55441
- Model: 753S (P/N G22SA25A per original box)
- Type: Bifurcated fiber optic end assembly
- Sheath: Stainless steel armored flexible conduit
- Tip: Shared bifurcated black tip housing with two fiber terminations
- Compatible sensors: Q45 Series, Omni-Beam, Valu-Beam, Maxi-Beam, Multi-Beam, Econo-Beam D12, Mini-Beam
- Minimum bend radius (stainless steel sheath): 3/4" (varies slightly by bundle diameter per spec label)
- Includes: Fiber end assembly + original Banner Engineering box with installation instructions
Applications
Banner Engineering fiber end assemblies are used in industrial photoelectric sensing applications where a sensor must detect objects in tight spaces or harsh environments where the sensor body itself cannot be mounted close to the detection point. The fiber optic cable carries light from the sensor to the sensing tip and back, enabling detection of small parts, edges, or presence/absence conditions on assembly lines, packaging machinery, and material handling systems. The 753S bifurcated design — two fiber bundles sharing a single tip — is suited for diffuse or opposed sensing modes depending on the sensor it is paired with. Banner's Q45, Omni-Beam, Maxi-Beam, and Valu-Beam families were widely adopted in factory automation from the 1980s onward, and replacement fiber assemblies like the 753S remain in demand for maintaining installed sensor systems still in active service.
This Banner 753S Q45 Fiber End Assembly has been inspected and is in good used condition. The stainless steel armored cable and bifurcated tip housing show normal handling wear consistent with prior use. The original Banner Engineering box is included. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Banner |
Model: |
753S |
MPN: |
753S |
Secondary Model: |
G22SA25A |
Type: |
Fiber Optic End Assembly |
SKU: |
35179 |
Compatible With 1: |
Banner Q45 Series sensors |
Compatible With 2: |
Banner Omni-Beam sensors |
Compatible With 3: |
Banner Valu-Beam sensors |
Compatible With 4: |
Banner Maxi-Beam sensors |
Compatible With 5: |
Banner Multi-Beam sensors |
Compatible With 6: |
Banner Econo-Beam D12 sensors |
Compatible With 7: |
Banner Mini-Beam sensors |
Sheath Material: |
Stainless Steel |
Fiber Configuration: |
Bifurcated (two fibers, shared tip) |
Tip Style: |
Opposed / bifurcated end with black housing |
Country/Region of Manufacture: |
United States |
Seller Notes: |
Fiber end assembly only; original Banner box included. |
Condition Notes: |
This Banner 753S Q45 Fiber End Assembly has been inspected and is in good used condition. The stainless steel cable and bifurcated tip show normal handling wear. Original Banner box included. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
