Avaya

Avaya AT&T Lucent 631WB1 System 75 G3 PBX Power Unit 48VDC 9.3A 100-240V

(No reviews yet) Write a Review
SKU:
12114
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
10.00 LBS
Shipping:
Calculated at Checkout
  • AT&T Avaya Lucent 631WB1 System 75 PBX Power Unit — right-side view showing IEC AC inlet, voltage select switch, and Series 2 label
  • AT&T Lucent 631WB1 System 75 Power Unit — bottom/rear view showing backplane connector edge, bus connector, and hardware revision label
  • AT&T 631WB1 Power Unit — top panel showing rating plate with input/output specs, voltage select switch S1, caution label, and AT&T logo
$150.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Avaya AT&T Lucent 631WB1 System 75 G3 PBX Power Unit 48VDC 9.3A 100-240V

The AT&T 631WB1 is a slide-in power unit (custom DC rectifier) designed for use in AT&T, Lucent, and Avaya System 75 and System 75 G3 PBX telephone systems. It converts AC mains power to a regulated 48V DC output to supply the PBX cabinet's internal electronics and line cards. A voltage select switch (S1) on the front panel allows configuration for 120V or 220V AC supply environments. Per the rating plate, a fan is required for cooling and the unit must be installed in a controlled environment.

Specifications & What's Included

  • Model: 631WB1, Series 2
  • Type: Component Type Custom Rectifier (PBX Power Unit)
  • Input: 100V – 9.9A / 120V – 8.3A, 60 Hz
  • Input: 200V – 5.9A / 240V – 5.3A, 60 Hz
  • Input: 150V – 4.3A
  • Output: 48V DC at 9.3A
  • Voltage Select Switch S1: 120V / 220V positions (front panel)
  • Rectifier type: Component Type Custom Rectifier
  • Cooling: Fan required; intended for installation in a controlled environment
  • Form factor: Slide-in chassis module with backplane edge connector
  • AC inlet: IEC C14-style input connector on front face
  • Compatible with: AT&T / Lucent / Avaya System 75, System 75 G3 PBX platforms
  • Power unit only — no cables or mounting hardware included

Applications

The System 75 was AT&T's mid-range digital PBX platform introduced in the mid-1980s, aimed at medium to large enterprise voice communications. It evolved through several generations — including the System 75 G3 — before the AT&T Enterprise Networks division became Lucent Technologies in 1996 and subsequently Avaya in 2000. The 631WB1 power unit fits directly into the System 75 cabinet chassis, providing the regulated 48V DC bus that powers the system's port circuit packs and processor cards. Replacement power units for these legacy systems remain in demand by organizations that continue to operate System 75 / Definity G3 infrastructure or are maintaining spare parts inventories for aging installations. Telecom service providers, legacy PBX resellers, and enterprise IT departments supporting long-running Avaya/Lucent telephony platforms are the primary buyers for this type of surplus power module.

Condition: Used
This AT&T Avaya Lucent 631WB1 System 75 PBX Power Unit has been inspected and appears to be in good used condition. It was pulled from a working telecom environment where it was previously in service. The unit shows normal wear consistent with use in a rack-mount installation — the metal chassis has light surface oxidation visible on the sides, and the caution/warning labels are intact and legible. The rating plate, voltage select switch (S1), and backplane connector are all present and undamaged. It has not been powered up or tested at our facility. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
AT&T
Model:
631WB1
MPN:
631WB1
Secondary Model:
Series 2
Type:
PBX Telecom Power Unit / Rectifier
SKU:
12114
Compatible With:
AT&T / Lucent / Avaya System 75, System 75 G3 PBX
Input Voltage:
100V–120V AC / 200V–240V AC / 150V AC
Input Current:
8.3A @ 120V; 5.3A @ 240V; 4.3A @ 150V
Output Voltage:
48V DC
Output Current:
9.3A
Frequency:
60 Hz
Voltage Select:
Switch S1: 120V / 220V positions
Rectifier Type:
Component Type Custom Rectifier
Cooling:
Fan required for cooling
Installation Requirement:
Controlled environment required
Form Factor:
Slide-in module / rack-mount chassis card
Country/Region of Manufacture:
United States
Seller Notes:
Power unit only — no cables or mounting hardware included.
Condition Notes:
This AT&T Avaya Lucent 631WB1 System 75 PBX Power Unit is in good used condition, pulled from a working telecom environment. Shows light surface oxidation on chassis. Not powered or tested at our facility.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose