Description
Arcom Control Systems SCEND V1 Issue 3 J120 PCB Card 50V Max 2A SCEND 510/4
This is a new open-box SCEND V1 Issue 3 PCB card manufactured by Arcom Control Systems Ltd of England. The board carries the product designation J120 and connector reference SCEND 510/4. A safety warning printed on the board specifies a maximum operating voltage of 50V and a maximum current of 2A.
Specifications & What's Included
- Manufacturer: Arcom Control Systems Ltd
- Board designation: SCEND V1 Issue 3
- Board reference: J120
- Connector / part reference: SCEND 510/4
- Maximum voltage: 50V
- Maximum current: 2A
- Country of manufacture: England
- Form factor: PCB card / plug-in module
- Connectors: multi-pin male edge connector (one end) and multi-pin female edge connector (opposite end)
- PCB color: green, standard FR4 construction
- Condition: new, unused — open-box surplus
Applications
Arcom Control Systems Ltd was a UK-based manufacturer of embedded industrial control hardware, active primarily in the 1980s and 1990s. The SCEND board family was designed as a backplane or interconnect card for modular industrial control systems, providing the physical and electrical bus connections between controller modules in rack or chassis-based automation equipment. Boards of this type were used in process control, machine automation, and industrial instrumentation applications where modular, card-based architectures allowed flexible system configuration. The 50V / 2A rating places this board in the low-voltage control signal domain rather than high-power switching. Replacement and spare PCBs from this era remain sought after by facilities maintaining legacy Arcom-based control systems.
This Arcom Control Systems SCEND V1 Issue 3 J120 PCB card is new and unused. It is open-box surplus stock — the board itself has not been used, but it may no longer be in its original packaging. The card appears clean and free of wear. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Arcom Control Systems |
Model: |
SCEND V1 Issue 3 |
MPN: |
SCEND 510/4 |
Secondary Model: |
J120 |
Type: |
Industrial Control PCB Card / Module |
SKU: |
26269 |
Condition: |
New – Open Box / Surplus |
Seller Notes: |
New open-box surplus PCB card. May be out of original packaging. |
Country/Region of Manufacture: |
England |
Max Voltage Rating: |
50V |
Max Current Rating: |
2A |
Form Factor: |
PCB Card / Module |
Connector Type: |
SCEND 510/4 multi-pin edge connector |
Compatible With: |
Arcom SCEND Control Systems |
Board Revision / Issue: |
Issue 3 |
Condition Notes: |
Arcom Control Systems SCEND V1 Issue 3 J120 PCB card. New, unused open-box surplus. Board is clean and uninstalled; original packaging may be absent. Please view photos and contact us with questions. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
