Description
Andrew FSJ4-50B Heliax 1/2" Coax Cable 60ft 50 Ohm Type-N Male 1–10200 MHz
The Andrew FSJ4-50B is a 1/2" flexible Heliax coaxial cable rated at 50 Ohm impedance and terminated here with Andrew 44ASW Type-N male connectors. This assembly measures 60 feet in overall length and covers an operating frequency range of 1 MHz to 10,200 MHz (10.2 GHz). FSJ4-50B uses a foam-dielectric, corrugated copper outer conductor construction that balances low loss with flexibility, making it a widely used feedline in RF and microwave installations.
Specifications & What's Included
- Model: Andrew FSJ4-50B
- Cable type: 1/2" flexible Heliax, foam dielectric, corrugated copper outer conductor
- Impedance: 50 Ohm
- Overall length: 60 ft
- Operating frequency range: 1 MHz – 10,200 MHz (10.2 GHz)
- Connectors: Andrew 44ASW – Type-N male, both ends
- Outer jacket: Black polyethylene
- Included: Cable assembly only — no additional hardware
Applications
Andrew (now CommScope) FSJ4-50B Heliax is a standard RF feedline used extensively in cellular base station installations, distributed antenna systems (DAS), land mobile radio (LMR), broadcast transmitter sites, and point-to-point microwave links. The 1/2" flexible Heliax series was designed for runs where rigid hardline is impractical — equipment rooms, tower top connections, and in-building DAS riser runs — while still offering significantly lower loss than standard flexible coax. The Type-N connector is a rugged, weatherproof interface rated well beyond 10 GHz, common on base station antennas, combiners, splitters, and test equipment RF ports. This cable type has been a workhorse of the wireless infrastructure industry since the 1980s and remains in active use in both new and legacy cellular and broadcast installations worldwide.
This Andrew FSJ4-50B 1/2" Heliax Coaxial Cable has been inspected and appears to be in good used condition. The corrugated outer jacket shows typical surface marks and handling wear consistent with previous installation use, as visible in the photos. Both Type-N male connectors (Andrew 44ASW) are present and appear intact with no visible damage to the mating surfaces. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Andrew |
Model: |
FSJ4-50B |
MPN: |
FSJ4-50B |
SKU: |
51751 |
Type: |
Flexible Heliax Coaxial Cable |
Impedance: |
50 Ohm |
Cable Diameter: |
1/2 inch (0.507" OD) |
Length: |
60 ft |
Connector Type: |
Type-N Male |
Connector Part Number: |
Andrew 44ASW |
Jacket Type: |
Black PE Outer Jacket |
Construction: |
Corrugated Copper Outer Conductor |
Seller Notes: |
Cable only — 60ft with Type-N male connectors (Andrew 44ASW) on both ends. |
Country/Region of Manufacture: |
United States |
Compatible With: |
Cellular base stations, DAS, broadcast, microwave links |
Form Factor: |
Flexible Coaxial Feedline |
Condition Notes: |
This Andrew FSJ4-50B 60ft Heliax coaxial cable has been inspected and is in good used condition. The jacket shows normal handling wear; both Type-N male connectors are present and intact. Pulled from a working environment. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |