Description
Andrew FSJ4-50B Heliax 1/2" Coax Cable 23.7ft 50 Ohm Type-N Male 10.2 GHz
The Andrew FSJ4-50B is a 1/2" flexible Heliax coaxial cable terminated with Andrew 44ASW Type-N male connectors at both ends. Heliax cables use a corrugated, semi-rigid outer conductor that provides excellent shielding effectiveness while retaining flexibility, making them a standard choice for RF feed-line runs in wireless, cellular, and microwave installations. This assembly measures 23 feet 8 inches (approximately 23.7 ft) in overall length and is rated for operation from 1 MHz through 10,200 MHz (10.2 GHz) at a characteristic impedance of 50 ohms.
Specifications & What's Included
- Model: Andrew FSJ4-50B
- Cable type: 1/2" flexible Heliax (corrugated outer conductor)
- Characteristic impedance: 50 ohm
- Overall length: 23 ft 8 in (~23.7 ft)
- Connector: Andrew 44ASW – Type-N Male (both ends)
- Operating frequency range: 1 – 10,200 MHz (10.2 GHz)
- Outer conductor: corrugated aluminum
- Cable jacket: black polyethylene outer sheath
- Includes: cable assembly only
Applications
The Andrew FSJ4-50B is widely used as a low-loss RF feed line in cellular base station installations, two-way radio systems, distributed antenna systems (DAS), and point-to-point or point-to-multipoint microwave links. The 1/2" Heliax construction offers a favorable balance of flexibility and attenuation performance, making it practical for equipment-room runs, antenna jumpers, and rooftop feed lines where a rigid hard-line would be difficult to route. Type-N connectors are the standard interface for this class of cable and are found throughout cellular, land mobile radio, Wi-Fi backhaul, and broadcast RF infrastructure. The 10.2 GHz upper frequency rating covers virtually all common cellular bands (700 MHz through 2.7 GHz), Wi-Fi, and lower microwave bands, making FSJ4-50B a versatile choice for modern RF installations.
This Andrew FSJ4-50B 1/2" Heliax Coaxial Cable is in good used condition. The cable jacket and corrugated outer conductor appear intact with no visible kinks, crushing, or breaks along the length. Both Andrew 44ASW Type-N male connectors are present and show normal brass tarnishing consistent with field use, but the center pins and mating interfaces look clean and undamaged. There is a label strip along the cable body. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Andrew |
Model: |
FSJ4-50B |
MPN: |
FSJ4-50B |
SKU: |
51750 |
Type: |
Heliax Coaxial Cable |
Impedance: |
50 Ohm |
Cable Diameter: |
1/2 inch (0.5") |
Cable Length: |
23.7 ft (23 ft 8 in) |
Connector Type: |
Type-N Male |
Connector Model: |
Andrew 44ASW |
Frequency Range: |
1 – 10,200 MHz (10.2 GHz) |
Cable Construction: |
Flexible Heliax (corrugated outer conductor) |
Seller Notes: |
Cable only — no additional accessories included. |
Country/Region of Manufacture: |
United States |
Condition Notes: |
This Andrew FSJ4-50B 1/2" Heliax Coaxial Cable is in good used condition. Jacket and corrugated outer conductor are intact with no visible kinks or damage. Both Type-N male (Andrew 44ASW) connectors are present and undamaged. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |