Description
Agricultural Poly Hose Irrigation Drip Tubing 3/4" 1" 1-1/2" Polyethylene Pallet Lot
This is a pallet lot of used polyethylene drip irrigation tubing in three diameters — 3/4", 1", and 1-1/2" — pulled from a local sod farm where it served as temporary field irrigation. The tubing is sold by the pallet as shown in the photos; quantities and mix of sizes vary as pictured. Note that the poly pipe has stiffened from outdoor use and includes pieces with approximately 90-degree bends, which is characteristic of poly drip line that has been deployed in the field and stored.
Specifications & What's Included
- Material: Polyethylene (poly) drip irrigation tubing
- Diameters included: 3/4", 1", and 1-1/2" (assorted mix)
- Sold as a complete pallet lot — quantity and mix as shown in photos
- Tubing condition: stiffened from field use; some pieces bent approximately 90 degrees
- Source: local sod farm, used for temporary field irrigation
- Wooden pallet included as shown
- Note: seller also has 4" irrigation tubing available from the same farm — contact us for details
Applications
Polyethylene drip irrigation tubing is a standard material in agricultural and landscape irrigation systems. Poly pipe in the 3/4"–1-1/2" range is commonly used as mainline and sub-mainline supply runs in drip and micro-irrigation setups, distributing water from a header to individual emitter laterals or soaker lines. These sizes are widely used in row crop farming, sod and turf production, nursery irrigation, and residential or commercial landscape drip systems. Poly pipe is valued in temporary and seasonal field irrigation because it is lightweight, flexible when new, UV-resistant, and easy to connect with standard barbed fittings and clamps. Buyers often source used lots of this material for fittings salvage, repair parts, or low-pressure secondary irrigation lines where new tubing is not required. The 3/4" and 1" sizes are typical lateral supply lines, while 1-1/2" is often used as a larger sub-main or manifold run.
This used polyethylene drip irrigation tubing pallet came from a local sod farm where it was used for temporary field irrigation. The lot contains assorted sizes — 3/4", 1", and 1-1/2" diameter tubing — and the tubing has stiffened and taken on bends, including some pieces bent approximately 90 degrees, which is typical of poly pipe that has been in service and stored outdoors. Buyers should plan to inspect and sort pieces upon receipt; some sections may be suitable for reuse while others may be better suited for parts or fittings. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
Unbranded |
Model: |
Assorted Poly Drip Irrigation Tubing |
Type: |
Polyethylene Drip Irrigation Tubing |
SKU: |
53047 |
Condition: |
Used – Pulled from Working Environment |
Pipe/Hose Diameter: |
3/4", 1", and 1-1/2" (assorted) |
Material: |
Polyethylene (Poly) |
Application: |
Agricultural Drip Irrigation, Field Irrigation |
Lot/Quantity: |
Sold by the pallet as shown |
Seller Notes: |
Pallet of assorted poly irrigation tubing; tubing is hard and bent. Sold as shown. |
Compatible With: |
Drip irrigation systems, sod farm irrigation setups |
Condition Notes: |
Used poly drip irrigation tubing pallet from a sod farm. Assorted 3/4", 1", and 1-1/2" diameters. Tubing is stiffened and includes pieces bent approximately 90 degrees from prior use and outdoor storage. Sold as shown. |
