Adaptec

Adaptec AHA-2740/42/50/52 EISA SCSI Controller Card 50-Pin Floppy Enable

(No reviews yet) Write a Review
SKU:
28147
MPN:
AHA-2740/42/50/52
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
1.00 LBS
Shipping:
Calculated at Checkout
  • Adaptec AHA-2740/42/50/52 EISA SCSI controller card – top-down view showing main controller IC, secondary logic IC, internal SCSI header, and external 50-pin Centronics bracket port
  • Adaptec AHA-2740/42/50/52 EISA SCSI controller card – angled view showing full EISA edge connector, dual large ICs, multiple internal headers, and external 50-pin Centronics port on bracket
  • Adaptec AHA-2740/42/50/52 PCB close-up showing Adaptec logo, model number silk-screen, Floppy Enable jumper (J3), internal SCSI headers J2, crystal oscillator Y1, and Dallas DS210 chip
$19.30
Was: $45.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Adaptec AHA-2740/42/50/52 EISA SCSI Controller Card 50-Pin Floppy Enable

The Adaptec AHA-2740/42/50/52 is an EISA-bus SCSI host adapter designed to connect SCSI-2 storage devices — hard drives, tape drives, CD-ROM drives, and scanners — to EISA-slot PCs and workstations. It covers the AHA-2740, AHA-2742, AHA-2750, and AHA-2752 variants in the same hardware revision, with configuration handled via on-board jumpers including the prominent FLOPPY ENABLE header (J3).

Specifications & What's Included

  • Manufacturer: Adaptec
  • Model: AHA-2740/42/50/52
  • Bus Interface: EISA (Extended Industry Standard Architecture) – full-length card
  • SCSI Standard: SCSI-2
  • External Connector: 50-pin Centronics (DB50) SCSI port on bracket
  • Internal Connector: 50-pin internal SCSI ribbon header
  • Floppy Support: Floppy Enable jumper (J3) on board – floppy header present
  • On-board chipset: Adaptec SCSI controller IC (large QFP package, center of PCB)
  • Secondary logic IC: large PLCC/QFP package right of center
  • Support IC: Dallas DS210-series chip visible on PCB
  • Crystal oscillator: Y1 on board
  • PCB manufacture marking: GS PCB Korea
  • Form factor: Full-length EISA expansion card with steel bracket
  • Included: Card only — no SCSI cables, driver disks, or software included

Applications

EISA SCSI host adapters like the AHA-2740 series were workstation- and server-class expansion cards used in the early-to-mid 1990s, when EISA provided a 32-bit, bus-mastering alternative to the more common 16-bit ISA bus. They were a standard choice for connecting high-performance SCSI-2 storage subsystems — including large-capacity hard drives, DAT tape libraries, and optical drives — to EISA-based PCs and servers from manufacturers such as Compaq, HP, AST, and various workstation vendors. The AHA-274x series in particular was well-regarded for its bus-mastering DMA capability, which offloaded data transfer work from the CPU and improved throughput in multi-drive configurations. Today these cards are sought by collectors and technicians maintaining legacy EISA-bus systems, vintage workstations, and period-accurate builds from the early 1990s computing era.

Condition: Used
This Adaptec AHA-2740/42/50/52 EISA SCSI Controller Card has been inspected and is in good used condition. The PCB is clean and free of visible damage, with no broken traces or bent pins observed. The external 50-pin Centronics bracket port and internal headers appear intact. Normal light handling wear is present consistent with prior use. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Adaptec
Model:
AHA-2740/42/50/52
MPN:
AHA-2740/42/50/52
Type:
SCSI Host Adapter / Controller Card
SKU:
28147
Bus Interface:
EISA
SCSI Standard:
SCSI-2
External Connector:
50-Pin Centronics (DB50)
Internal Connector:
50-Pin Internal SCSI Header
Floppy Support:
Yes – Floppy Enable jumper (J3) on board
Compatible Models:
AHA-2740, AHA-2742, AHA-2750, AHA-2752
Form Factor:
Full-Length EISA Card
PCB Manufacture:
GS PCB Korea
Seller Notes:
Card only; no cables or software included.
Country/Region of Manufacture:
Korea
Condition Notes:
Adaptec AHA-2740/42/50/52 EISA SCSI Controller Card has been inspected and is in good used condition. PCB is clean, no visible damage. External 50-pin port and internal headers intact. Light handling wear.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose