Description
Accurate Gas Control Systems AG-T Bath Chiller Heater -15 to +85C 120V
The Accurate Gas Control Systems AG-T is a self-contained recirculating bath chiller/heater capable of maintaining temperatures from -15°C to +85°C. It combines a refrigeration system and an immersion heating element in a single floor-standing cabinet, circulating temperature-controlled fluid through an internal tub and to external equipment via flexible hoses and brass fittings. Temperature is set via a rotary dial on the front control panel and monitored on a digital display.
Specifications & What's Included
- Manufacturer: Accurate Gas Control Systems
- Model: AG-T
- Temperature range: -15°C to +85°C
- Input voltage: 120V AC
- Tub interior dimensions: 13 × 11½ × 6 inches
- Controls: Heat / Off / Coolmax rocker switch; rotary set-point dial; digital temperature display (°C)
- Fluid connections: brass valve and fitting assembly on top deck with inline pressure gauge and shut-off valves
- Flexible fluid hoses attached
- Interior: immersion coil assembly (heating and cooling coils) visible inside tub
- Cabinet: blue powder-coated steel, freestanding floor unit on casters
- Power cord included
Applications
Recirculating bath chillers/heaters like the AG-T are standard tools in research and industrial laboratories that require precise, stable fluid temperature control over a wide range. They are commonly used to maintain constant temperature in analytical instruments, reactors, viscometers, and test fixtures by circulating temperature-conditioned fluid through an external loop. The -15 to +85°C range makes this unit suited for both sub-ambient cooling applications and moderate heating tasks without needing separate equipment. Units of this type were widely used in aerospace, materials research, semiconductor, and chemical laboratories where environmental control of a test specimen or instrument is required. This particular unit was previously in service at a large aerospace research facility.
This Accurate Gas Control Systems AG-T Bath Chiller/Heater came to us from a large aerospace research lab, where it was previously in service. It has not been powered up or tested at our facility. The unit appears to be in good used condition overall — the blue cabinet shows normal wear consistent with lab use, and the top-deck brass valve and gauge assembly, flexible hoses, and interior immersion coils are all present and appear intact. Please review all photos carefully and contact us with any questions before purchasing.
Warranty Information
Additional Information
Brand: |
Accurate Gas Control Systems |
Model: |
AG-T |
MPN: |
AG-T |
Type: |
Recirculating Bath Chiller/Heater |
SKU: |
24539 |
Temperature Range: |
-15°C to +85°C |
Voltage: |
120V |
Tub Dimensions: |
13 x 11.5 x 6 in |
Power Requirements: |
120V AC |
Controls: |
Digital temperature display, rotary set-point dial, Heat/Off/Coolmax switch |
Fluid Connections: |
Brass fittings with pressure gauge and inline valves |
Form Factor: |
Freestanding Floor Unit |
Application: |
Laboratory temperature control, recirculating bath |
Seller Notes: |
Includes attached flexible hoses and brass valve/gauge assembly on top deck. |
Country/Region of Manufacture: |
United States |
Condition Notes: |
This Accurate Gas Control Systems AG-T Bath Chiller/Heater came from a large aerospace research lab. Not powered or tested at our facility. Cabinet shows normal lab wear; hoses, valves, and interior coils appear intact. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |