Generic

Unbranded 110V AC Electronic Shutter Controller BNC In/Out Optical Lab

(No reviews yet) Write a Review
SKU:
39888
MPN:
110 Volt AC
Condition:
Used
Availability:
Usually ships within 1–2 business days.
Weight:
5.00 LBS
Shipping:
Calculated at Checkout
  • Electronic Shutter Controller front panel with SHUTTER CONTROL label and illuminated red rocker switch, teal metal enclosure
  • Electronic Shutter Controller rear panel showing BNC IN and OUT connectors with orange label, AC power cord with NEMA 5-15P plug
  • Close-up of SHUTTER CONTROL front panel label and illuminated red rocker switch
  • Close-up of rear BNC connectors labeled OUT and IN on orange label, rear panel detail
$60.00
Was: $125.00
Current Stock: 1

Sold Out

Description

Unbranded 110V AC Electronic Shutter Controller BNC In/Out Optical Lab

Electronic shutter controller for optical and imaging applications. Accepts 110V AC, 60Hz input power and features BNC connectors for signal input and output on the rear panel.

Specifications & What's Included

  • Power: 110V AC, 60Hz
  • Connectors: BNC IN and OUT (rear panel)
  • Front Panel: Illuminated red rocker power switch
  • Enclosure: Teal/blue with cream front panel, benchtop form factor
  • Includes: AC power cord (NEMA 5-15P)

Applications

Shutter controllers regulate mechanical or electronic shutters in optical systems, microscopy setups, and laboratory imaging equipment. Commonly used in research facilities and industrial optical applications to control light transmission timing. This type of controller typically integrates with camera systems, spectrometers, or other photoelectric instrumentation requiring synchronized shutter operation.

Condition: Used
This Electronic Shutter Controller has been inspected and is in good used condition. The enclosure shows light surface wear consistent with lab use but is structurally sound with no dents or major damage. The front-panel rocker switch and BNC IN/OUT connectors appear intact. An AC power cord is included. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Unbranded
Model:
Shutter Controller
Type:
Electronic Shutter Controller
SKU:
39888
Power Requirements:
110V AC, 60Hz
Connector Type:
BNC (IN and OUT on rear panel)
Front Panel Controls:
Illuminated red rocker power switch
Form Factor:
Benchtop / Desktop Enclosure
Enclosure Color:
Teal/Blue with cream front panel
Includes:
AC power cord (NEMA 5-15P)
Condition:
Used – Inspected, Good Condition
Seller Notes:
Includes AC power cord. No manufacturer or model number visible.
Condition Notes:
Electronic Shutter Controller inspected and in good used condition. Enclosure shows light surface wear. BNC IN/OUT connectors and rocker switch appear intact. AC power cord included.
View AllClose

Related Products

Related Products

Unbranded electronic shutter assembly from mask aligner — dual black anodized housings on baseplate with rotary solenoid actuator, gray cable, and DB9 connector, three-quarter front view Close-up of DB9 male 9-pin D-sub connector on electronic shutter assembly with red and gray wiring leads visible
Add to Cart
Quick view

Unbranded Electronic Shutter Assembly Mask Aligner Semiconductor UV Optics DB9

Generic

$150.00
Was: $300.00
Unbranded Electronic Shutter Assembly Mask Aligner Semiconductor UV Optics DB9This is an unbranded electronic shutter assembly removed from a mask aligner UV exposure system. The assembly consists of...
40971
SKU:
40971
Availability:
Usually ships within 1–2 business days.
Weight:
12.00 LBS
Brand:
Unbranded
Model:
Electronic Shutter Assembly
Type:
Electronic Shutter Assembly
Application:
Mask Aligner / Photolithography UV Exposure System
Actuator Type:
Rotary Solenoid
Connector Type:
DB9 Male (9-pin D-sub)
Housing Material:
Black Anodized Aluminum
Number of Optical Apertures:
2 (one per housing block)
Aperture Style:
Circular, with shutter blade/disc
Mounting Base:
Integrated black anodized aluminum baseplate
Cable:
Gray multi-conductor cable with red/white leads
Dimensions (approx.):
7 in x 6 in x 5 in
Form Factor:
Benchtop / Inline Module
Compatible With:
Mask Aligner UV Exposure Systems
SKU:
40971
Condition:
Used – Pulled from Working Environment
Seller Notes:
Includes integrated cable and DB9 connector; pulled from a working mask aligner.
Condition Notes:
Unbranded mask aligner electronic shutter assembly pulled from a working environment. Inspected and in good condition — housings show light surface wear. Solenoid actuator, shutter discs, cable, and DB9 connector all present and appear intact.
Oriel 7072 Photodiode Detection System Controller — front-left three-quarter view showing LED display, analog meter, Multiplier and Ambient Suppress knobs, and Oriel branding Oriel 7072 Detection System Controller — rear panel showing Oriel Corporation label plate, DB-25 connector, banana jacks, ventilation grille, and AC power cable
Add to Cart
Quick view

Oriel 7072 Photodiode Detection System Controller 110V Newport Optical Lab

Oriel

$125.00
Was: $250.00
Oriel 7072 Photodiode Detection System Controller 110V Newport Optical Lab The Oriel Corporation Model 7072 is a benchtop photodiode detection system controller designed to interface with photodiode...
20281
SKU:
20281
Availability:
Usually ships within 1–2 business days.
Weight:
12.00 LBS
Brand:
Oriel Corporation
Model:
7072
MPN:
7072
Type:
Photodiode Detection System Controller
SKU:
20281
Condition:
Used – Inspected
Form Factor:
Benchtop
Power Requirements:
110V, 50/60Hz, 0.5A
Input Voltage:
110 V
Frequency:
50/60 Hz
Current Rating:
0.5 A
Manufacture Date:
April 1984
Country/Region of Manufacture:
United States
Application / Use Case:
Optical detection, photocurrent measurement, lab
Interface / Connector:
DB-25 parallel connector, banana jacks (rear panel)
Controls:
Multiplier, Ambient Suppress, Response, Zero, Measure
Display:
LED digital readout + analog meter
Measurement Type:
Photocurrent / optical power
Compatible With:
Oriel photodiode detectors and optical benches
Seller Notes:
Controller unit only — no detector or accessories included
Condition Notes:
Oriel 7072 Photodiode Detection System Controller inspected and in good condition. Shows normal lab wear. Controller unit only — no detector or accessories included. Please contact us with any questions.
Pomona Electronics 3.75 MHz band pass filter – front-left angled view showing BNC IN and OUT connectors, black rotary volume control knob, ON toggle switch, and Scope-Teka calibration sticker on teal aluminum mountable enclosure Pomona Electronics 3.75 MHz band pass filter – rear/side view showing smooth teal anodized aluminum enclosure with mounting flanges
Add to Cart
Quick view

Pomona Electronics 3.75 MHz Band Pass Filter Mountable BNC In/Out 20dB

Pomona Electronics

$75.00
Was: $150.00
Pomona Electronics 3.75 MHz Band Pass Filter Mountable BNC In/Out 20dBThis Pomona Electronics band pass filter is centered at 3.75 MHz and is housed in a compact, mountable aluminum enclosure. It...
32973
SKU:
32973
Availability:
Usually ships within 1–2 business days.
Weight:
3.00 LBS
Brand:
Pomona Electronics
Model:
3.75 MHz Band Pass Filter
Type:
Band Pass Filter
Center Frequency:
3.75 MHz (peaks at 3.79 MHz)
Insertion Loss:
20.2 dB
Q Factor:
26.6
-3 dB Bandwidth:
3.716 MHz to 3.858 MHz
-20 dB Limits:
3.53 MHz to 4.09 MHz
Attenuation Range:
Additional 15 dB via volume control
Connector Type:
BNC (IN and OUT)
Form Factor:
Mountable enclosure with mounting flanges
Calibrated By:
Scope-Teka
SKU:
32973
Condition:
Used – Inspected, good condition
Seller Notes:
Calibration sticker present (Scope-Teka). Unit only — no accessories included.
Condition Notes:
Pomona Electronics 3.75 MHz band pass filter. Inspected and in good used condition. Enclosure intact with light surface wear. BNC connectors and rotary control present and undamaged. Scope-Teka calibration sticker on front panel.