Hydrofarm

Hydrofarm PS-24-20 Solar Soak System Nanosolar Nanocell 110-240VAC 24VDC 20A

(No reviews yet) Write a Review
SKU:
46871
MPN:
PS-24-20
Condition:
Used
Availability:
This item requires 2-pallet freight shipping. Please contact us for a freight quote before purchasing.
Weight:
1,111.00 LBS
Shipping:
Calculated at Checkout
  • Hydrofarm PS-24-20 Solar Soak System full setup — blue control cabinet left, open aluminum rack with TE Technology modules and Hydrofarm luminaire housing right, Welch compressor on lower shelf
  • Hydrofarm PS-24-20 Solar Soak System — closer view of open rack showing two TE Technology thermoelectric module assemblies, blue pneumatic tubing, and orange flexible exhaust duct connected to Hydrofarm luminaire housing
  • Hydrofarm PS-24-20 Solar Soak System — alternate angle showing full rack assembly with luminaire housing open, TE modules on shelf, blue control cabinet on casters to the right
  • Hydrofarm RD Luminaire housing close-up on aluminum rack showing two TE Technology thermoelectric module trays with blue pneumatic lines and wiring harnesses; Hydrofarm logo visible on luminaire
  • Close-up of TE Technology thermoelectric module assembly — aluminum-framed cell fixture with circuit board, heat sink fins, blue pneumatic connectors, and multi-color wiring harness
  • TE Technology CP-200HTTT label — Model CP-200HTTT, Serial 0125, date 2011-5-31, operating voltage 24VDC 17.4A (TE), 24VDC 0.75A (FAN), CE marked
  • Hydrofarm PS-24-20 Solar Soak System — open lid on TE module tray showing dual cell fixture plates with orange gasket seals and circuit boards visible beneath acrylic/glass lid
  • Two TE Technology thermoelectric module assemblies side by side on rack shelf — aluminum frames, heat sink fins, pneumatic fittings, multi-color wiring including blue, red, yellow, and green leads
  • TE Technology CP-200TT label — Model CP-200TT, Serial 0027, date 2008-12-15, operating voltage 24VDC 17.3A (TE), 24VDC 1.0A (FAN), CE marked
  • Lower shelf of aluminum rack showing Welch air compressor (white/gray), two Phantom dimmable digital ballasts (black finned housings), and power cords
  • Welch 2581B-24 air compressor label — 115V 60Hz 4.0A, Motor No. 608804AC025, UL Listed, Niles IL USA, thermally protected, insulation class B
  • Two Phantom PHE1THD dimmable digital ballasts on lower shelf — black anodized aluminum finned housings with Phantom and Hydrofarm branding, power cords connected
  • Phantom PHE1THD dimmable digital ballast label — Model PHE1THD, 1000W HPS (S-52) or MH (M-47) lamps, Input IEC connector, Reset 1 and Reset 2 buttons, Hydrofarm Petaluma CA, S/N HF113700642
  • Hydrofarm RD Luminaire Series compliance label — for use with Hydrofarm power supply series RD, PH, SG, PRO, GL, or XTRASUN (XT), 1000W max, Hydrofarm Petaluma CA
  • Hydrofarm PS-24-20 Solar Soak System luminaire housing fully open — white cylindrical lamp housing raised, revealing TE module shelf and lower rack wiring; orange exhaust duct visible at left
  • Interior of control cabinet rear panel showing two power supply/controller boards mounted on shelf with red and black wiring, fan, linear rail, and terminal blocks
  • Blue lockable cabinet with door open — LG LCD monitor mounted inside upper compartment, mouse visible on shelf below
  • TE Technology PS-24-20 power supply label — Model PS-24-20, Serial 1006, date 2009-12-1, IN: 110-240VAC 50/60Hz, OUT: 24VDC @ 20A, Assembled in USA
  • Blue cabinet keyboard drawer open — Dell wired keyboard in lower drawer, mouse on shelf above, cable management visible
  • Interior of control enclosure side panel showing green circuit/control board with large electrolytic capacitors, relay, and multi-conductor wiring harness; partial TE Technology label visible at left
  • Hydrofarm PS-24-20 Solar Soak System for Nanosolar Nanocells 110-240VAC 50/60Hz
  • Hydrofarm PS-24-20 Solar Soak System for Nanosolar Nanocells 110-240VAC 50/60Hz
  • Hydrofarm PS-24-20 Solar Soak System for Nanosolar Nanocells 110-240VAC 50/60Hz
  • Hydrofarm PS-24-20 Solar Soak System for Nanosolar Nanocells 110-240VAC 50/60Hz
  • Hydrofarm PS-24-20 Solar Soak System for Nanosolar Nanocells 110-240VAC 50/60Hz
  • Hydrofarm PS-24-20 Solar Soak System for Nanosolar Nanocells 110-240VAC 50/60Hz
  • Hydrofarm PS-24-20 Solar Soak System for Nanosolar Nanocells 110-240VAC 50/60Hz
  • Hydrofarm PS-24-20 Solar Soak System for Nanosolar Nanocells 110-240VAC 50/60Hz
  • Hydrofarm PS-24-20 Solar Soak System for Nanosolar Nanocells 110-240VAC 50/60Hz
$2,000.00
Was: $4,000.00
Current Stock: 1

Sold Out

Description

Hydrofarm PS-24-20 Solar Soak System Nanosolar Nanocell 110-240VAC 24VDC 20A

Solar soak and burn-in test system for Nanosolar Nanocell solar cells. Complete integrated setup with power supply, thermal electric modules, lighting ballasts, compressor, monitor, and supporting hardware.

Specifications & What's Included

  • Input: 110-240VAC, 50/60Hz; Output: 24VDC, 20A
  • TE Technology power supply (PS-24-20) and two TE modules (CP-200TT, CP-200HTTT)
  • Welch 2581B-24 air compressor, 115V 60Hz
  • Two Phantom PHE1THD 1000W dimmable digital ballasts (HPS/MH compatible)
  • LG LCD monitor, Dell keyboard and mouse
  • Blue lockable cabinet on casters and aluminum extrusion rack with shelf

Applications

Solar soak systems were used for extended testing and conditioning of solar cells and photovoltaic materials. This Hydrofarm configuration supports laboratory burn-in protocols with integrated thermal regulation, compressed air supply, and high-intensity lamp simulation. The system is sized for Nanosolar Nanocell technology evaluation and durability testing in R&D and manufacturing environments.

Condition: Used
This Hydrofarm PS-24-20 Solar Soak System for Nanosolar Nanocells has been inspected and is in good used condition. The system is complete and includes all major components: the TE Technology PS-24-20 main power supply, two TE Technology thermoelectric module assemblies (CP-200HTTT and CP-200TT) with aluminum-framed cell fixture trays, a Welch 2581B-24 air compressor, two Phantom PHE1THD 1000W dimmable digital ballasts, the Hydrofarm RD luminaire housing, an LG LCD monitor, a Dell keyboard and mouse, the blue lockable rolling control cabinet, and the aluminum extrusion open rack with lower shelf. Components show normal wear consistent with prior use. The blue cabinet has minor surface scuffing. The TE module trays and aluminum rack are intact with no visible damage. This item ships on 2 pallets via freight — please contact us for a freight quote before purchasing. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Hydrofarm
Model:
PS-24-20
MPN:
PS-24-20
Type:
Solar Soak / Burn-In Test System
SKU:
46871
Input Voltage:
110-240VAC
Input Frequency:
50/60Hz
Output Voltage:
24VDC
Output Current:
20A
Compatible With:
Nanosolar Nanocell solar cells
Includes - Power Supply:
TE Technology PS-24-20 (SN 1006, 2009-12-1)
Includes - TE Module 1:
TE Technology CP-200TT (SN 0027, 2008-12-15)
Includes - TE Module 2:
TE Technology CP-200HTTT (SN 0125, 2011-5-31)
TE Module Operating Voltage:
24VDC, 17.3A (TE); 24VDC, 0.75-1.0A (FAN)
Includes - Air Compressor:
Welch 2581B-24, 115V 60Hz 4.0A (SN 011200000721)
Air Compressor Motor No.:
Welch 608804AC025
Includes - Ballasts:
2x Phantom PHE1THD Dimmable Digital Ballast 1000W
Ballast Compatibility:
1000W HPS (S-52) or MH (M-47) lamps
Luminaire Series:
Hydrofarm RD Luminaire Series (1000W max)
Includes - Monitor:
LG LCD monitor (model not fully legible)
Includes - Keyboard/Mouse:
Dell keyboard and mouse
Includes - Enclosure:
Blue lockable cabinet on casters
Includes - Frame/Rack:
Aluminum extrusion open rack with lower shelf
Country/Region of Manufacture:
United States
Shipping Method:
2-pallet freight required
Condition:
Used – Inspected and in Good Condition
Seller Notes:
Complete system: power supply, TE modules, compressor, ballasts, monitor, keyboard, rack
Condition Notes:
Hydrofarm PS-24-20 Solar Soak System inspected, good used condition. Includes TE Technology modules (CP-200HTTT, CP-200TT), Welch compressor, 2x Phantom PHE1THD ballasts, LG monitor, Dell keyboard, cabinet, and rack. Freight shipping required.
View AllClose

Related Products

Related Products

Nanosolar NanoCell flexible CIGS solar cells — lot of 100 stacked in clear protective wrapping with label Nanosolar NanoCell flexible CIGS solar cell bent into a curve showing semi-flexible aluminum substrate, iridescent surface
Add to Cart
Quick view

Nanosolar NanoCell 2.6W Flexible CIGS Solar Cell 0.45V 5.8A 165x135mm Lot/100

Nanosolar

$150.00
Was: $375.00
Nanosolar NanoCell 2.6W Flexible CIGS Solar Cell 0.45V 5.8A 165x135mm Lot/100This is a lot of 100 Nanosolar NanoCell flexible CIGS thin-film solar cells, totaling 260 watts of rated generating...
53033
SKU:
53033
Availability:
Usually ships within 1–2 business days.
Weight:
25.00 LBS
Brand:
Nanosolar
Model:
NanoCell
MPN:
NS NanoCell
Type:
Flexible CIGS Thin-Film Solar Cell
SKU:
53033
Seller Notes:
Lot of 100 raw uncoated cells; 260W total; stored in sealed cartons with desiccant
Country/Region of Manufacture:
United States
Cell Technology:
CIGS (Copper Indium Gallium Selenide) Print2Power
Cell Construction:
MWT (Metal Wrap Through) screen-printed
Substrate:
Semi-flexible lightweight aluminum
Rated Power (per cell):
2.6 Watts
Total Lot Power:
260 Watts (100 cells)
Quantity:
100 cells
Vmpp:
0.45 V
Impp:
5.8 A
Voc:
0.61 V
Isc:
6.7 A
Power Tolerance:
-10% to +10%
Temp Coefficient Pmax:
-0.40 %/K
Temp Coefficient Voc:
-0.30 %/K
Temp Coefficient Isc:
+0.01 %/K
Max System Voltage:
600V UL / 1000V IEC
Operating Temperature Range:
-40 to +85°C
Cell Length:
165 mm (6.5 in)
Cell Width:
135 mm (5.3 in)
Cell Height/Thickness:
0.4 mm (0.02 in)
Surface Finish:
Raw, uncoated
Connection Method:
Conductive adhesive or epoxy (no output cables)
Output Terminal:
Connection tab (positive); uncoated aluminum strip (negative)
Datasheet Reference:
NSC-NS NanoCell-CDS_Preliminary_EN.v2
Condition Notes:
Nanosolar NanoCell 2.6W CIGS flexible solar cells, lot of 100. New and unused, stored in sealed cartons with desiccant. Raw uncoated cells, no wear or damage. Open-box — original retail packaging not included.
Nanosolar NanoCell CIGS flexible solar cell — front active surface showing metallic grid contact pattern Nanosolar NanoCell flexible solar cell — reverse aluminum substrate side, plain brushed finish
Add to Cart
Quick view

Nanosolar NanoCell 2.6W Flexible CIGS Solar Cell 0.45V 5.8A Aluminum DIY

Nanosolar

$5.00
Was: $10.00
Nanosolar NanoCell 2.6W Flexible CIGS Solar Cell 0.45V 5.8A Aluminum DIY Single CIGS thin-film solar cell rated at 2.6 watts. Features a flexible aluminum substrate and operates across a temperature...
49602
SKU:
49602
Availability:
Usually ships within 1-2 business days.
Weight:
0.60 LBS
Specifications:
Nanosolar Nanocell Preliminary Cell Spec Sheet
Brand:
Nanosolar
Model:
NanoCell
MPN:
NanoCell
Type:
CIGS Flexible Thin-Film Solar Cell
SKU:
49602
Rated Power:
2.6 Watts per cell
Vmpp (Maximum Power Voltage):
0.45 V
Impp (Maximum Power Current):
5.8 A
Voc (Open Circuit Voltage):
0.61 V
Isc (Short Circuit Current):
6.7 A
Cell Technology:
CIGS (Copper Indium Gallium Selenide)
Substrate / Base Material:
Thin flexible aluminum sheet
Cell Dimensions:
165mm x 135mm x 0.4mm (6.5 x 5.3 x 0.02 in)
Operating Temperature Range:
-40 to +85°C
Surface Finish:
Raw / Uncoated
Connection Method:
Conductive adhesive, epoxy, or double-sided conductive tape
Condition:
New
Country/Region of Manufacture:
United States
Seller Notes:
Single cell, new and unsealed from sealed carton. Multiple quantities available.
Condition Notes:
Nanosolar NanoCell 2.6W CIGS flexible solar cell — new and unused, stored in sealed airtight cartons with desiccant. Active surface and aluminum substrate are clean and undamaged. Multiple quantities available.
Nanosolar NanoCell CIGS solar cells in foam-separated stacks on pallet tray, with sealed gray storage carton labeled B0959 behind Fan of Nanosolar NanoCell flexible CIGS solar cells showing iridescent thin-film surface with MWT screen-printed grid pattern
Add to Cart
Quick view

Nanosolar NanoCell 6000ct 15600W CIGS MWT Flexible Solar Cells 2.6W 0.45V

Nanosolar

$3,500.00
Was: $7,000.00
Nanosolar NanoCell 6000ct 15600W CIGS MWT Flexible Solar Cells 2.6W 0.45V Full carton of 6,000 CIGS thin-film flexible solar cells rated at 2.6W per cell. These copper indium gallium selenide cells...
47024
SKU:
47024
Availability:
Usually ships within 3-5 business days; large carton shipment — contact us for freight quote.
Weight:
350.00 LBS
Specifications Sheet:
Nanosolar NanoCell Preliminary Cell Spec Sheet (NSC-NS NanoCell-CDS_Preliminary_EN.v2)
Brand:
Nanosolar
Model:
NanoCell
MPN:
NS NanoCell
Type:
CIGS Flexible Thin-Film Solar Cell
SKU:
47024
Quantity per Lot:
6,000 cells
Total Power (Lot):
15,600 Watts (15.6 kW)
Rated Power per Cell:
2.6 Watts
Power Tolerance:
-10% to +10% (Pmpp and Voc/Isc/Vmpp/Impp)
Vmpp (V):
0.45 V
Impp (A):
5.8 A
Voc (V):
0.61 V
Isc (A):
6.7 A
Temp Coefficient Pmax:
-0.40 %/K
Temp Coefficient Voc:
-0.30 %/K
Temp Coefficient Isc:
+0.01 %/K
Max System Voltage:
600V UL / 1000V IEC
Operating Temperature Range:
-40 to +85°C
Cell Technology:
CIGS (Copper Indium Gallium Selenide)
Cell Design:
MWT (Metal Wrap Through) Print2Power
Substrate:
Thin flexible aluminum sheet
Cell Length:
165 mm (6.5 in)
Cell Width:
135 mm (5.3 in)
Cell Thickness:
0.4 mm (0.02 in)
Condition:
New – Unused, stored sealed with desiccant
Country/Region of Manufacture:
United States
Seller Notes:
Full carton of 6,000 cells. Stored in sealed cartons with desiccant.
Application:
DIY solar panels, R&D, photovoltaic experiments
Series Fuse Rating:
N/A
Output Cables:
N/A (raw cells, no cables)
Output Terminal:
N/A (raw cells, no pre-attached terminals)
Condition Notes:
Nanosolar NanoCell CIGS flexible solar cells — new and unused. Full 6,000-cell carton stored sealed with desiccant. No signs of use or wear. Please view photos and contact us with any questions.
Nanosolar NanoCell 2.6W flexible CIGS solar cell in sealed clear plastic packaging — top view Nanosolar NanoCell CIGS solar cell bent to show flexibility of thin aluminum substrate — side profile view
Add to Cart
Quick view

Nanosolar NanoCell 2.6W Flexible CIGS Solar Cell 0.45V 5.8A Lot of 10 26W

Nanosolar

$16.30
Was: $49.99
Nanosolar NanoCell 2.6W Flexible CIGS Solar Cell 0.45V 5.8A Lot of 10 26W Lot of 10 flexible CIGS thin-film solar cells manufactured by Nanosolar. Each cell produces 2.6W at 0.45V and 5.8A, for a...
47026
SKU:
47026
Availability:
Usually ships within 1–2 business days.
Weight:
1.00 LBS
Specifications:
Nanosolar Nanocell Preliminary Cell Spec Sheet
Brand:
Nanosolar
Model:
NanoCell
MPN:
NanoCell 2.6W
SKU:
47026
Condition:
New – Unused, stored sealed with desiccant
Seller Notes:
Lot of 10 individual CIGS solar cells; 26W total output
Country of Manufacture:
United States
Form Factor:
Flexible Sheet / Thin Film
Solar Cell Technology:
CIGS (Copper Indium Gallium Selenide)
Substrate Material:
Flexible Aluminum Sheet
Power Output Per Cell:
2.6W
Total Lot Power Output:
26W (10 cells)
Voltage at MPP (Vmp):
0.45V
Current at MPP (Imp):
5.8A
Quantity in Lot:
10 cells
Connection Method:
Double-sided conductive tape recommended
Storage:
Airtight sealed cartons with desiccant
Specifications Sheet:
Nanosolar NanoCell Preliminary Cell Spec Sheet (see listing)
Condition Notes:
These Nanosolar NanoCell 2.6W flexible CIGS solar cells are new and unused. They are stored in airtight sealed cartons with desiccant. Please view our photo set and contact us if you have any questions.