Uni-Solar PVL-144 144 Watt Brand New PowerBond Amorphous Solar Panel No Cables

Uni-Solar PVL-144B 144 Watt Brand New PowerBond Amorphous Solar Panel - No Cables with bottom facing solder points for soldering your cables

Maximum Power (Pmax): 144 Watts

Nominal Operating Voltage: 24 Volts

Max Power Voltage (Vmpp): 33 Volts

Max Power Current (Impp): 4.4 Amps

Open Circuit Voltage (Voc): 46.2 Volts

Short Circuit Current (Isc): 5.3 Amps

Bottom Solder Point for wiring. Designed for use where wires will be routed under panel installation utilizing junction box not included.

Max System Voltage: 600 Volts

Module Efficiency: 6.67%

Lightweight & Flexible

Virtually Unbreakable (No Glass)

Shadow & High Heat Tolerant

Frame Material: Frameless

Module Connector: Solder Point on Bottom of Panel. No MC Connectors (Please see photos)

This panel has no UL rating sticker

Bonding Adhesive installed on the back of the laminate

Panel Weight: 17 Pounds

Panel Dimensions:18' x 15 3/8 18 Feet Long by 15-3/9 Inches Wide.

Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost - usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Here is a video with many examples. 

 

Condition: Open Box

These brand new made in USA solar panels are packed and stored in the factory carton of 30 panels. The Unisolar manufacturing and distribution facility was liquidated in 2012 and these panels came direct from Unisolar. We do have various brochures and installation guides produced by Unisolar available we can offer you if requested. Uni-solar peel and stick flexible panels are no longer made and are getting more rare by the day.