Miteq
-
Miteq U-9473-125K C-Band Upconverter RF Satcom 6424 MHz Rackmount Tested
Miteq
$600.00Was: $1,200.00Miteq U-9473-125K C-Band Upconverter RF Satcom 6424 MHz Rackmount TestedC-Band RF upconverter for satellite communications uplink applications. Converts IF signals to RF output at 6424 MHz for satcom...52755- SKU:
- 52755
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 27.00 LBS
- Brand:
- Miteq
- Model:
- U-9473-125K
- MPN:
- U-9473-125K
- Type:
- C-Band RF Upconverter
- SKU:
- 52755
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Unit only; tested working with RF signal generator and RF amplifier
- Country/Region of Manufacture:
- United States
- Form Factor:
- Rackmount, 2U
- Power Requirements:
- 100V-240V AC, 47-63 Hz, 250 VA max
- Frequency Band:
- C-Band
- Application:
- Satellite Communications (Satcom) Uplink
- Signal Conversion:
- IF to RF Upconversion
- Display Frequency Shown:
- 6424.000 MHz
- Attenuation Control:
- Variable, 30.0 dB shown on display
- RF Output Connector:
- SMA (J2 – RF Output, rear panel)
- IF Input Connector:
- SMA (J1 – IF Input, rear panel)
- IF Monitor Output:
- SMA (J1A – IF Mon. Output, rear panel)
- Reference Input:
- 5 MHz external/internal selectable (J5, rear)
- Remote Interface:
- DB-9 serial (J6, J10 – Remote Interface, rear)
- Summary/Alarm Output:
- DB-9 (J3 – Summary/Alarm, rear panel)
- Redundancy Interface:
- DB-7 (J7 – Redundancy/Alarm, rear panel)
- Front Panel Controls:
- LCD frequency/attenuation display, numeric keypad, function keys
- Front Panel Monitors:
- IF LO Monitor, RF LO Monitor BNC ports
- CE Certified:
- Yes
- Manufacturer Location:
- Miteq Inc., Hauppauge, NY
- Condition Notes:
- Miteq U-9473-125K C-Band RF Upconverter tested and confirmed working using an RF signal generator and RF amplifier. Powers on, LCD displays correctly. Light cosmetic wear on panels. Please view photos and contact us with questions.
$600.00Was: $1,200.00 -
Miteq U-9453 C-Band Upconverter 70/140 MHz IF to 5.85-6.65 GHz RF Satcom
Miteq
$1,800.00Was: $3,600.00Miteq U-9453 C-Band Upconverter 70/140 MHz IF to 5.85-6.65 GHz RF SatcomC-Band RF upconverter for satellite earth station uplink applications. Converts 70 MHz or 140 MHz intermediate frequency...52451- SKU:
- 52451
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 31.00 LBS
- Brand:
- Miteq
- Model:
- U-9453
- MPN:
- U-9453
- Type:
- C-Band RF Upconverter
- SKU:
- 52451
- Frequency Band:
- C-Band
- IF Input Frequency:
- 70 MHz / 140 MHz
- RF Output Frequency Range:
- 5.85 - 6.65 GHz
- LO Frequency:
- 6.137 GHz
- Power Requirements:
- 100-120V AC 3.0A / 220-240V AC 1.5A, 47-63 Hz
- Power Consumption:
- 250 VA Max
- Form Factor:
- Rackmount
- Dimensions:
- 29" W x 24" D x 5" H
- Interface / Connectors:
- SMA/Type-N RF ports, DB9 remote interface, BNC monitors
- Control / Interface:
- Front panel keypad + LCD display; remote interface (x2)
- Alarm Outputs:
- Summary Alarm, Redundancy Alarm (DB9)
- Reference:
- Internal / External selectable
- Monitor Outputs:
- IF LO A, IF LO B, RF LO, RF Signal, IF Monitor (70 MHz), IF Monitor (140 MHz)
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Unit only; tested working at our facility, good cosmetic condition
- Country/Region of Manufacture:
- United States
- Application:
- Satellite Earth Station Uplink, C-Band Satcom Transmission
- Condition Notes:
- Miteq U-9453 C-Band upconverter. Tested at our facility and in good working condition. Cosmetically very good — light surface wear only. All connectors and controls intact. Please view photos and contact us with questions.
$1,800.00Was: $3,600.00 -
Miteq U-9456 54735 Ku-Band Upconverter 70 MHz IF 13.5-14.5 GHz RF Satcom
Miteq
$1,100.00Was: $2,200.00Miteq U-9456 54735 Ku-Band Upconverter 70 MHz IF 13.5-14.5 GHz RF SatcomThe Miteq U-9456/54735 is a Ku-Band upconverter designed for satellite communications earth station applications. It accepts a...52450- SKU:
- 52450
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 31.00 LBS
- Brand:
- Miteq
- Model:
- U-9456
- Secondary Model:
- 54735
- MPN:
- U-9456/54735
- SKU:
- 52450
- Type:
- Ku-Band Upconverter
- Condition:
- Used – Inspected and Tested
- IF Input Frequency:
- 70 MHz
- RF Output Frequency Range:
- 13.5 GHz to 14.5 GHz
- Frequency Band:
- Ku-Band
- Power Requirements:
- 100–240V AC, 47–63 Hz, 250 VA Max
- Input Voltage Options:
- 120V–3.0A / 220V–1.5A / 240V–1.5A
- RF Output Connector:
- Type N (J2 — RF Output)
- IF Input Connector:
- Type N (J1 — IF Input)
- IF Monitor Output Connector:
- Type N (J1A — IF Monitor Output)
- Reference Frequency:
- 5 MHz (Int/Ext selectable)
- Attenuation:
- Variable (dB), front-panel adjustable
- Remote Interface:
- Dual DB-15 remote interface ports (J6, J10)
- Alarm Outputs:
- Summary Alarm (J3, DB-9), Redundancy Alarm (I7)
- Form Factor:
- Rackmount, 3U
- Dimensions:
- 24" x 19" x 5"
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Unit only; no accessories included. Tested working at our facility.
- Application:
- Satellite Communications (Satcom), VSAT Earth Station
- Condition Notes:
- Miteq U-9456/54735 Ku-Band Upconverter tested and confirmed working at our facility using an RF Signal Generator and RF Amplifier. Powers on, LCD and keypad functional. Typical rack wear cosmetically. Please contact us with any questions.
$1,100.00Was: $2,200.00 -
Miteq DN8000/5942 C-Band Downconverter 4198.6/71 MHz RF Satcom 115VAC Rackmount
Miteq
$295.00Was: $600.00Miteq DN8000/5942 C-Band Downconverter 4198.6/71 MHz RF Satcom 115VAC RackmountC-Band RF downconverter that converts satellite receive signals from 4198.6 MHz to a 71 MHz intermediate frequency...50322- SKU:
- 50322
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 21.00 LBS
- Brand:
- Miteq
- Model:
- DN8000/5942
- MPN:
- DN8000/5942
- Type:
- C-Band RF Downconverter
- SKU:
- 50322
- Input Frequency:
- 4198.6 MHz (C-Band RF)
- Output Frequency:
- 71.0 MHz (IF)
- Frequency:
- 4198.6 / 71 MHz
- RF Band:
- C-Band
- IF Output:
- 71.0 MHz
- Power Requirements:
- 115 VAC
- Fuse Rating:
- 1.0A
- Form Factor:
- Rackmount
- Front Panel Indicators:
- Out of Lock, Freq/Pwr Monitor, APC T.P., LO Tune
- Test Points:
- GND, +20V, APC T.P., LO Tune
- Rear Connectors:
- J1 RF Input (SMA), J2 IF Output 71.0 MHz (SMA), J3 Summary Alarm (multi-pin circular)
- Local Oscillator:
- Phase-locked; Out-of-Lock and APC indicators on front panel
- Application:
- Satellite ground station C-Band receive chain
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from a working satcom environment
- Condition Notes:
- Miteq DN8000/5942 C-Band Downconverter inspected and in good used condition. Pulled from a working satcom environment where it was in active use and functional. Front panel and connectors intact. Normal rack wear.
$295.00Was: $600.00 -
Miteq Model 6107 Range Calibration Subsystem 70 MHz Satcom RF 19" 2U Rack
Miteq
$150.00Was: $300.00Miteq Model 6107 Range Calibration Subsystem 70 MHz Satcom RF 19" 2U RackThe Miteq Model 6107 is a 19-inch 2U rackmount Range Calibration Subsystem operating at 70 MHz, designed for use in satellite...49837- SKU:
- 49837
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 31.00 LBS
- Brand:
- Miteq
- Model:
- 6107
- MPN:
- 6107
- Type:
- Range Calibration Subsystem
- SKU:
- 49837
- Frequency:
- 70 MHz
- Form Factor:
- 19" Rackmount, 2U
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes 9 internal Miteq RF and audio modules as listed
- Country/Region of Manufacture:
- United States
- Manufacturer Location:
- Hauppauge, N.Y.
- Application:
- Satellite Communications (Satcom), Microwave RF
- Frequency Range:
- 50–90 MHz (module range); 65–75 MHz (BFP); 70 MHz center
- Included Module 1:
- Miteq PM-70-1R-6107 – 70 MHz
- Included Module 2:
- Miteq SDA-6107 – Audio
- Included Module 3:
- Miteq AGC-4A-6107 – 50–90 MHz
- Included Module 4:
- Miteq FDM-70-FF-6107 – 70 MHz
- Included Module 5:
- Miteq BFP-70-9607 – 65–75 MHz
- Included Module 6:
- Miteq XT-01-70-15P-6107 – 70 MHz
- Included Module 7:
- Miteq FLT-ATT-6107 – 70 MHz
- Included Module 8:
- Miteq BIAB-6107 – Audio
- Included Module 9:
- Miteq AU-1A-1039-6107 – 50/90 MHz
- Front Panel Controls:
- FM Demodulator output level, Phase Modulator output level
- Front Panel Indicators:
- Summary Status LED; Test Points: +15V, -15V, +5V, GND
- Power Switch:
- Push ON/OFF
- Rear Connectors:
- IEC AC inlet, BNC (Phase Mod I.F. Out, F.M. Demod I.F. In)
- Rear Terminal Blocks:
- B/B IN, B/B OUT, GND
- Rear Alarm Output:
- Summary Alarm Out (D-sub connector)
- Fusing:
- 3x 2 AMP fuses (rear panel)
- Serial Number:
- 42807
- Condition Notes:
- Miteq 6107 Range Calibration Subsystem, 70 MHz. Used, inspected, pulled from a working satcom environment. All 9 internal modules present. Chassis shows normal age wear. Please contact us with any questions.
$150.00Was: $300.00 -
Miteq U/D-9502-61289 C-Band Up/Downconverter RF Unit 70 MHz-6.13 GHz Satcom
Miteq
$1,100.00Was: $2,200.00Miteq U/D-9502-61289 C-Band Up/Downconverter RF Unit 70 MHz-6.13 GHz SatcomC-Band up/downconverter RF unit for satellite ground station applications. Converts between 70 MHz intermediate frequency...49656- SKU:
- 49656
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 42.00 LBS
- Brand:
- Miteq
- Model:
- U/D-9502-61289
- Secondary Model:
- U/D-9502-57687
- MPN:
- U/D-9502-61289
- SKU:
- 49656
- Type:
- C-Band Up/Downconverter RF Unit
- Condition:
- Used – Pulled from Working Environment
- Frequency Range:
- 70 MHz – 6.13 GHz
- IF Frequency:
- 70 MHz
- RF Frequency (Uplink):
- 5.845–6.425 GHz (C-Band TX)
- RF Frequency (Downlink):
- 3.625–4.2 GHz (C-Band RX)
- Enclosure Type:
- Outdoor Weatherproof Enclosure
- Form Factor:
- Outdoor Enclosure / Wall-Mount
- Dimensions:
- 19" x 17" x 6.5"
- Connector Types:
- Multi-pin circular (J1–J18), SMA/coax RF ports
- Interfaces:
- Remote Interface, Status/Redundancy Alarm, U-Link, DC Power Input
- Control Interface:
- Remote Interface (J6), U-Link (J16/J17)
- Alarm Outputs:
- Status/Redundancy Alarm; UP RF LO, DN RF LO, IF LO, SSPA, LNA, XMT MUTE
- Front Panel:
- LED display, numeric keypad, REMOTE/TRANSMIT/RECEIVE/MEMORY buttons
- Country/Region of Manufacture:
- United States
- Included: Control Board:
- Miteq M/N 117908 (Qty 1)
- Included: IF/Upconverter Module:
- Miteq M/N UDM9550-57687, 70 MHz (Qty 1)
- Included: BPF C-Band RX:
- Miteq M/N FLT-112385, 3.625–4.2 GHz (Qty 1)
- Included: BPF C-Band TX:
- Miteq M/N FLT-112387, 5.845–6.425 GHz (Qty 1)
- Included: NFS Converter Module:
- Miteq M/N NFS 4.625-5.205-100KS-57687 (Qty 2)
- Included: 1080 MHz LO Module:
- Miteq M/N 113938-1.08-57687, 1080 MHz (Qty 1)
- Included: 1150 MHz LO Module:
- Miteq M/N 117503-1150, 1150 MHz (Qty 1)
- Included: Quartz Oscillator:
- Wenzel Associates 500-02755/117321, 10 MHz (Qty 1)
- Included: RF Tray:
- Miteq M/N RF TRAY / 57687 (Qty 1)
- Application:
- Satellite Ground Station, VSAT, Teleport, C-Band SCPC/TDMA
- Seller Notes:
- Complete RF unit in outdoor enclosure with full internal module set as listed.
- Condition Notes:
- Miteq U/D-9502-61289 C-Band Up/Downconverter RF Unit pulled from a working satellite ground station environment, in use and functional. Inspected; good condition with normal field wear on enclosure exterior.
$1,100.00Was: $2,200.00 -
Miteq U-8153/38152 C-Band Upconverter Dual Conversion 70 MHz IF 6 GHz Satcom
Miteq
$575.00Was: $1,200.00Miteq U-8153/38152 C-Band Upconverter Dual Conversion 70 MHz IF 6 GHz SatcomC-Band satellite upconverter performing dual conversion from 70 MHz intermediate frequency to 5.845–6.425 GHz RF output...49618- SKU:
- 49618
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 37.00 LBS
- Brand:
- Miteq
- Model:
- U-8153/38152
- MPN:
- U-8153/38152 47233
- Secondary Model:
- 38152
- Type:
- C-Band Satellite Upconverter
- SKU:
- 49618
- Conversion Type:
- Dual Conversion
- IF Input Frequency:
- 70 MHz
- RF Output Frequency Range:
- 5.845 – 6.425 GHz
- Frequency Band:
- C-Band (Transmit)
- IF Input Connector:
- J1 IF Input (BNC/N-type, rear panel)
- RF Output Connector:
- J2 RF Output (rear panel)
- Remote Interface:
- J6 Remote Interface (D-Sub 25-pin), RS-232 remote
- Alarm Outputs:
- Summary Alarm (J3), Redundancy Alarm (J7), Remote Mute (J8)
- Front Panel Alarms:
- Modulator, RF-LO, IF-LO LED indicators
- Front Panel Controls:
- Gain Adjust, Remote (REM), Frequency Select (OMNI/DISH)
- Front Panel Monitors:
- RF Monitor port, 1 kHz Monitor, 1 kHz Adjust, Deviation Adjust
- Rear Panel Test Points:
- +20V, +5V, GND, IF LO A, IF LO B, RF LO, Freq & Power
- LO Tune:
- LO Tune port on rear panel
- Power Requirements:
- 120 VAC, 3A
- Form Factor:
- Rackmount
- Country/Region of Manufacture:
- United States
- Manufacturer Location:
- Hauppauge, NY
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from working satellite earth station environment
- Condition Notes:
- Miteq U-8153/38152 C-Band Upconverter in good used condition. Pulled from a working satellite earth station where it was in active use and functional. Normal rack-service wear. All connectors and panel controls intact.
$575.00Was: $1,200.00 -
Miteq DN8000/10268 RF Satcom Downconverter 2.2-2.3 GHz 70MHz IF w/ LPNF-20
Miteq
$175.00Was: $350.00Miteq DN8000/10268 RF Satcom Downconverter 2.2-2.3 GHz 70MHz IF w/ LPNF-20Satellite communication downconverter that converts RF signals in the 2.2–2.3 GHz band to a 70 MHz intermediate frequency...39412- SKU:
- 39412
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 25.00 LBS
- Brand:
- Miteq
- Model:
- DN8000/10268
- MPN:
- DN8000/10268
- Secondary Model:
- LPNF-20
- SKU:
- 39412
- Type:
- RF Satellite Downconverter
- RF Input Frequency:
- 2.2–2.3 GHz
- IF Output Frequency:
- 70 MHz
- LO Reference Frequency:
- 118.614580 MHz
- RF Input Port:
- J1 – RF Input 4198.5 MHz (SMA connector)
- IF Output Port:
- J2 – IF Output 70 MHz (BNC connector)
- Alarm/Control Port:
- J3 – Summary Alarm (multi-pin circular)
- Power Requirements:
- 120 VAC, 1A
- Local Oscillator Module:
- Miteq XTO-01-118.614580-20P, 118.614580 MHz
- Low Noise Filter Module:
- Miteq LPNF-20
- Phase Lock Module:
- Miteq PLM-4269.625A-20P-5942
- Amplifier Module:
- Miteq AM-1039M-7924
- Power Supply Module:
- Miteq PS-120-HC24-2.4-10268
- Additional Module:
- Miteq M45-2A-0150M-20P
- Front Panel Indicators:
- Phase Voltage, Out of Lock, Freq & Power (LO Status)
- Front Panel Controls:
- TUNE adjust; POWER push on/off; test points +20V, GND
- Form Factor:
- Rackmount
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes internal Miteq modules: LPNF-20, XTO-01-118.614580-20P, PLM-4269.625A-20P-5942, AM-1039M-7924, PS-120-HC24-2.4-10268
- Condition Notes:
- Miteq DN8000/10268 RF Satcom Downconverter inspected and in good condition. Pulled from a working environment where it was actively in use. All internal Miteq modules present. Minor cosmetic wear only.
$175.00Was: $350.00